Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will protect your valuable possession from theft. It is discreet and doesn’t require additional key fobs.
The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence up to 20 presses. This will then allow your vehicle to start.
Simple PIN code Change Process
Many owners are upgrading their security due to the increase in vehicle theft. There are a myriad of aftermarket security devices available, from tracking systems to alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. A tracking device can assist you in locating your vehicle in the event of it being stolen however, it won’t prevent the crime. Immobilisers, however perform exactly as they claim on the tin – they disable your car’s motor so that it can’t be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your car.
Utilizing the buttons already in your car, the ghost device creates an exclusive sequence that has to be entered before the engine can start. This can be done using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the need to use the button sequence. This feature is particularly useful when you need to surrender your car to a valet service or parking since the immobiliser will still be active and not deactivated.
The Ghost is a unique and innovative device that works in conjunction with buttons on your vehicle rather than as a separate device. It’s not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you may own. This makes it a more cost-effective option than a traditional wheel lock.
Weatherproof small device
The autowatch ghost immobiliser installation Ghost Immobiliser is a high-tech security system that protects your car from key cloning and hacking. It also prevents ECU swapping. It’s a weatherproof, tiny device that communicates directly with your vehicle’s ECU over the CAN data bus, which disables the engine. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices, which is a common technique used by thieves to bypass the immobilisers in place.
The benefit of using CAN data is that it runs silently compared to traditional systems. It can’t be detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch bmw m3 ghost installer does not produce LEDs, but instead utilizes the buttons in your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. This sequence can be extended to 20 presses to provide additional security. The iPhone app allows only one connection, and comes with an individual pairing code for the Ghost installations Review. All communication between the two devices is protected.
The Ghost prevents car thieves adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine will only start if a valid PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) and, therefore, you can give your car to a valet or service without having to enter the code.
Tested for each vehicle
The Autowatch Ghost is the world’s first aftermarket immobiliser for CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from going through its normal startup routine until you input an individual passcode. The system can be activated or deactivated through your smartphone’s app without the need for additional wires.
Standard factory immobilisers in vehicles work by having a transponder inside the key that sends a signal to the ECU. The car will begin to start if the correct code is transmitted. If, however, the transponder of a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It protects your vehicle from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away and even then, they would not be capable of driving it.
Ghost uses the buttons in your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate a unique PIN code that is changeable that must be entered before you can drive. This is done without any additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn’t transmit radio frequency signals so thieves are not able to utilize sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.
bmw m2 ghost installer is more difficult to get rid of than car alarms that require disarming with a series of buttons. This makes it a fantastic complement to a GPS tracking device which can be used to locate your vehicle after it’s been stolen.
Override of emergency PIN code
You do not have to go far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without your original key fobs.
Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code push sequence using the buttons you have on the steering wheel, door panel, and the center console. This unique PIN is entered in conjunction with your original key fob in order to stop the engine from starting. The unique PIN for override is on the black card that you will receive after installation. It is simple to remember because there are no LED indicators.
The device is hidden within the vehicle’s wiring and does not emit radio signals. Therefore, it cannot be detected using diagnostic software that can tell the security system you have installed. This makes it a great alternative to the tracker.
In contrast to other security systems that have an engine relay bay, CANBUS Immobilisers communicate with the car’s ECU and BCM via the CAN data bus (brand dependant). This allows them to disable a vehicle completely, by sending a digital block to the ECU and engine.
They can also be linked to an analog alarm immobiliser, tracker or alarm. This should be decided prior to the installation. They are also compatible with valet/service modes and an excellent alternative to a tracking device if you take your car to the dealer to address an electrical issue.
Service/Valet Mode
In recent times, there has been a increase in vehicles being stolen with no owner’s keys. It’s now easier than ever before to steal your pride & joy thanks to the availability of key cloning tools & door lock picks. To prevent this from happening, we have launched the Autowatch ghost immobiliser installer immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your car has been hijacked.
It directly communicates with your car’s ECU (Engine Control Unit) through the data loop of CAN. It is completely silent since it doesn’t use radio frequencies or key fobs. It can’t be detected by diagnostics or any other hacking device. It also stops the user from using the new ECU or key to bypass the system since only the PIN code allows the engine to start.
The device is hidden in your vehicle and is accessed by existing buttons on your steering wheel, center console, and door panels. Before you can start your car, you need to enter a unique and changeable PIN code that can be as long as 20 numbers.
This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being driven away or started without a PIN code being entered before. If the device how much is a ghost immobiliser armed and you attempt to drive off it will display a warning on your dash which will flash regularly for around 300m. If you type in your PIN code during this time, it will disarm the anti-hijack device and your car will continue to drive just as normal. If you do not enter your PIN at this time the indicator will continue to flash and will require a new pin code every time you try to start your car.