Locked Keys in Car? Here’s how to open the car door without key to Open Your Car Without Damage
Don’t panic if you’ve locked your keys inside your car. There are a variety of tricks you can try before calling a locksmith or a roadside assistance service.
You could, for instance using a shoelace that has an elastic slip knot to lift a post lock. You can also untwist a coathanger wire and shape it into hook. You can also use an inflatable wedge or door wedge.
Pump Wedge
If you’ve been stuck in a car locked up and no DIY solutions such as wire hangers, shoestrings or wedges work, it’s time to contact a professional. A locksmith or repo service provider might have specialized tools for unlocking that can help you open your vehicle without damaging it.
Make sure you use them correctly when they are available. Be aware of where to insert the wedge tool. Many people place the wedge tool in the top corner of the door which is the most vulnerable. This is a bad move because you could damage the weather stripping and wires within the doors. Instead, put the wedge in the largest part of the gap you can see and where it will be the strongest leverage.
The Pump Wedge is a premium inflatable wedge made of heavy duty non-marring vinyl material. It slides between the vehicle door and the door frame and is pumped up to create a gap that will allow you to slide in other tools such as an extended reach tool rod for opening your car. It comes with a hook at the other end that you can make into a shape to hold the latch on the door handle.
This can be done using two wooden door stops. You can use them to pry open the gap at the back of the door. You could also try using an jim that is slim that is a thin metal strip that can be bent into a hook that can be used to latch to the lock and then pull it up. This method requires some practice, however, since you should be cautious not to break the weather stripping of the door.
Another alternative is to use a shoelace, but this only works with older cars that don’t have a push button unlocking mechanism. You can tie a slip knot in the middle of the lace and then move it upwards and downwards through the door’s seam until it reaches the latch. Then, you can move the lace until it hooks the lock, tighten the slip knot and pull it upwards. This method can be more difficult than the other and can scratch the paint or dinge the door trim if you aren’t careful.
Inflatable Wedge
If you have an inflatable wedge-shaped car door opener, you’ll be able to quickly unlock your car without the need for prying or slim jim tools. The wedges can be positioned between the frame and window of the car. They will when they are inflated, they create a large opening to insert a tool with a lengthy reach, such as a button grabber or slim jim. This method is safer than using tools to pry and is suitable when you don’t have a screwdriver.
A wire coat hanger shaped into a hook is another option to unlock cars without causing damage to its exterior or interior. This can be used to grab the lock button, and it may work better than a flat screwdriver as it is less likely to cause damage to the paint on your car. However, it is important to check all of the doors to ensure that there isn’t another way to gain access.
You can also try using a plastic bag that has been bent into a noose-like or v-shaped shape, but you’ll have to be careful not to tear it as this could make your situation more difficult. This technique is especially effective if you are not able to locate the lock button. It might not be as reliable as using the wedge or a metal coat hanger but it could be useful when you’re in a tight spot.
The best tip we can offer you regarding being locked out of your car is to be in a calm state and put safety first. Luckily, there are several solutions to this kind of issue, and if you take the time to review this article, you will be ready for any scenario that comes your way. By following the steps we’ve given to you, you’ll be able to unlock your car and get on with your day without any unnecessary damage or stress. If you’re able to, make certain to have your keys when you leave your vehicle.
Shoelace
Being locked out of your vehicle is one of those “oh what a mess” moments that can ruin your day. In the event of an emergency, it’s a good idea to keep a few things at hand to aid in unlocking your car without damaging the windows. Certain of these items are simple to locate and could help you avoid the expense of an locksmith or waiting for roadside assistance to arrive.
A shoelace or twine can be used to unlock a car. It is simple to use and is compatible with many different cars. This method only works for cars that have post locks. They stack vertically on the window sill and are easily accessible from outside of the vehicle. To complete the task you need to use a shoelace to create a slip knot, then wiggle it into the crack between the frame of the window and the door. Once the slip knot has been positioned in the right place, pull both ends of the string upwards in order to lasso the lock.
This method is only applicable on older models with an open lock with a hook. A screwdriver, if it’s available could help open the door in a more aggressive manner. Another option is to grab a pole from a nearby object such as a doorframe or piece of wood, and then stick it into the window frame to create space for the rod that you will use to push the lock’s interior button.
Although the above strategies are safe for the majority of drivers, it’s best to get help if possible. This will help prevent further damage to the vehicle and it will also reduce the chance of an accident caused by the stress of the situation. If you do not have a mobile phone or cannot call for help, it is important to notify trusted family members and acquaintances know where your vehicle is. Additionally an extra set of keys can be stored in an easily accessible location in the vehicle so that you can retrieve them if required.
Wire Hanger
It can be a stressful experience to lock your keys in your car. The key is to stay calm and think about your options carefully. You can avoid making the situation worse if don’t panic.
You can also use a modified wire hanger for entry into your car. You’ll need to uncoil the coat hanger wire to get a straight end with a hook that you can use to move the lock rod. Once you can reach the lock rod and you are capable of pulling it up and open the door.
You could also use rods, or an iron piece from your vehicle. It is important to make sure that you don’t harm the vehicle during this process. It is recommended to avoid disassembling the vehicle. This method works better on older vehicles than modern ones. However, it can be used on cars with distinctive door handles on the outside.
You can also use a shoestring as well as a slip knot to accomplish a similar trick. It can also be used on a post lock, however it is slightly more difficult to use since you’ll depend on the tension from the string to grasp the lock. It is possible to do this by threading a shoestring through the small hole in the weatherstripping of the doors of your vehicle. Once the string is through you can pull it tight to form a loop that will wrap around the lock and allow you to pull it out. If you are lucky you will find the lock at the right spot.