Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They don’t get rotten or rusty like aluminum or timber.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and improve energy efficiency.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you’re doing all you can to ensure that your windows are in good shape.
Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you’ll need source some plastic spacers to help the new pane to fit correctly into the frame of the window.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.
It’s a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is large, you might want to use security screens that has an opening. This will give you the best of both.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a number of problems, including sliding. A sagging window repairs in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it’s important to act quickly to stop the issue from getting worse.
To repair a window that is sagging, you can try repositioning the hinges. First, you’ll need to open the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you’ve repositioned the hinges, close the window and test it for fit. If you’re happy with the fit, tighten the screws to ensure they stay in the right place.
If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.
uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it’s easy to fix the loose uPVC window handle yourself. First, you’ll need close the Window Repairs near Me and then perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.
3. Water Leaks
If you’re waking up to damp floors and mouldy walls each time it rains it’s crucial to take action. The leaks of water from windows do are not just a cause for destruction of your home’s structure but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to ‘over-caulk’ as this will only make the area harder to clean and reduce the efficiency of your energy.
Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.
Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.
It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or are loose and open with a breeze it could be hinges at fault. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.
Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is essentially a very simple process but it can be easier to do when you have a person to help you hold the frame up.
Make sure that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should be opened.
The issue can be caused either due to opening the window repair in the wrong way or due to a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to provide suggestions.
Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window repair near me easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a few different things. First, the hinges due to wear and tear can become misaligned, this will cause gaps to develop where the sash joins the frame. If they are beyond repair, it could be necessary to have them realigned. In addition, the interlock could be unbalanced. This is located on the hinge’s side, and might require to be cleaned. In certain instances it is possible to replace the hinges.
These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.
The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.
The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be cheaper to replace them than to repair them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert immediately.